Crescent’s new nail puller has a slick indexing head that locks in 14 positions, up to 180°. This allows you remove nails in hard-to-reach places, like between studs, rafters or joists. It also lets you find the best angle to optimize leverage.
Join us! Bosch On-Site Tool Demos at KMS Tools Coquitlam
Break New Ground
2016 Power Tour – Sept 16 (10am to 2pm) at KMS Tools Coquitlam location only
Continue reading “Join us! Bosch On-Site Tool Demos at KMS Tools Coquitlam”
Rite in the Rain Notebooks
Autumn is on its way and so is the soggy weather. Rite in the Rain notebooks feature weather-proof paper with a special coating that can handle the wettest, muddiest, greasiest, grimiest and oiliest jobsites. These notebooks are near indestructible and completely recyclable.
Makita DMR200 Jobsite Speaker with Bluetooth
Powered by any Makita slide-style battery pack (12V MAX CXT, 14.4V Li-Ion or 18V LXT) or an AC power source, Makita’s new Bluetooth speaker is both versatile and tough. It has an International Protection rating of IP64, so it’s impervious to dust and debris, and can endure more than a few splashes of water before it gives up the ghost.
Continue reading “Makita DMR200 Jobsite Speaker with Bluetooth”
Why You Need a Plunge-Cut Track Saw
Cutting 4′ x 8′ sheets of plywood can be a challenge—especially if your workspace isn’t large enough to accommodate a table saw with a large outfeed table. But even if you have a table saw, you still might be breaking down sheet goods with your circular saw and then making precise cuts with your table saw, a process that can waste valuable time and material. A plunge-cut track saw combines the maneuverability of a circular saw with the precision and stability of a table saw, allowing you to make clean, super-straight cuts on a single pass.
Continue reading “Why You Need a Plunge-Cut Track Saw”
2016 KMS Coquitlam Show & Shine
Well the 21st Annual KMS Tools Coquitlam Show & Shine has come and gone. It was a wet one, but the rain couldn’t stop you from eating delicious FREE smokies, winning thousands of dollars in PRIZES, and showing off your beautiful classic and custom cars! 109 cars came to shine in the rain, and a good time was had by car buffs and average Joes alike. Look for your favourite cars on our 2017 Car Calendars!
DeWalt FLEXVOLT
DeWalt has announced its newest cordless technology, FLEXVOLT, which brings corded power to a cordless system.
The FLEXVOLT battery switches voltage to match the tool, so it’s compatible with DeWalt’s existing 20V MAX platform as well as the new 60V MAX and 120V MAX cordless lineup that includes a cordless table saw and cordless 12″ sliding mitre saw. The new mitre saw uses two FLEXVOLT 60V MAX batteries to deliver 120 Volts and the cutting performance of a corded saw.
Continue reading “DeWalt FLEXVOLT”
KMS Tools First Ever Edmonton Show & Shine
Don’t miss the First Ever KMS Tools Edmonton Charity Show & Shine! Bring your family and friends to KMS on July 9th for loads of classic and custom cars, FREE smokies & pop, prizes, and tons more you won’t want to miss!
Continue reading “KMS Tools First Ever Edmonton Show & Shine”
New Milwaukee Products Unveiled at NPS 2016
Last week, Milwaukee hosted its annual new product symposium. Here are a few of the exciting new products Milwaukee has planned.
Continue reading “New Milwaukee Products Unveiled at NPS 2016”
Welding Gas at KMS Tools
Why lease welding gas cylinders? Own your own and have them filled at KMS Tools and Equipment.
We have a great selection of welding gas available at all locations!
- Oxygen (O₂), acetylene (C₂H₂), argon (Ar) and argon/carbon dioxide (Ar / CO₂) are available at all locations
- Tri-Mix (Ar / O₂ / CO₂) is available at Coquitlam, Abbotsford and Red Deer
- Carbon dioxide (CO₂) and nitrogen (N₂) are available at Coquitlam
Renting or leasing a cylinder can be expense. So stop by your nearest KMS Tools location, bring your own cylinder or buy a new one, and we will fill it for you while you wait or shop.
The Tool Corner 