Category: New Tools

Why you need to upgrade to the new Makita LS1016L

Published on by Your Friends in the Tool Business2 Comments

Designing and building motors since 1915, Makita is still one of the most trusted manufacturers in the industry. After the fall of the radial arm saw in the 1990s, their compound mitre saw started growing enormously in popularity. The LS1016 (the 10-inch version, hence the “10”) and the LS1216 (the 12-inch) are the newest models in Makita’s lineup of mitre saws. The old LS1013 and LS1214 were workhorses that lasted longer than most people hoped. So when the new model came out, almost everyone had large expectations.

Continue reading “Why you need to upgrade to the new Makita LS1016L” →

Milwaukee Fuel Series – Part 1: What’s all this talk about brushless motors?

Published on by Your Friends in the Tool Business1 Comment

Over the next couple weeks we’ll be talking about some of the technology used in Milwaukee’s new Fuel line of cordless products.

Our first installment in this series is about their new brushless motors. If you haven’t already been over to Milwaukee’s new Fuel microsite, you should check it out. You can have a look at some of the new products that they have been developing. There is a lot of hype about how Milwaukee’s new Powerstate Brushless motors are lighter, more efficient and more powerful than anything in the industry and hopefully we can better explain what this is all about.

Continue reading “Milwaukee Fuel Series – Part 1: What’s all this talk about brushless motors?” →

Trend® Airshield Face Protection System

Published on by Your Friends in the Tool Business

In the Face Shield World of vision protection, the emphasis has always been on deflecting particulate matter flying directly at you. While typical industry-standard face shields do a good job at that, often the fine particulate remains airborne, finding its way around the face shield or sometimes through its vents, causing dust and debris between your eyes and the shield.

Continue reading “Trend® Airshield Face Protection System” →

Vibration Control Finishing Sanders

Published on by Your Friends in the Tool Business

Bosch ROS65VC Vibration Control Sanders

Holding a random orbital sander while you progress through various grades of sandpaper looking for that final finish can be tiresome work. The vibrations transmitted though the tool, into your hand, wrist and forearm can fatigue tendons and muscles and require the taking of more frequent breaks. Thanks to a cool new Bosch-exclusive suspension system isolating the handle from the tool body, vibration transfer to the user is minimized, enhancing handling, user comfort and improving productivity.

Continue reading “Vibration Control Finishing Sanders” →

WunderTool – Milwaukee Cordless Hackzall

Published on by Your Friends in the Tool BusinessLeave a comment

Milwaukee Hackzall Cordless Recipro Saws

Definitely one of the coolest, most versatile tools that’s come about in a long time has to be the Milwaukee Hackzall. This somewhat bizarre hybrid of a jigsaw, a recipro saw and a power hacksaw, s versatile as it is unusual.

Continue reading “WunderTool – Milwaukee Cordless Hackzall” →

Stand Up & Drive – Simpson Quik-Drive Auto-Feed Screw System

Published on by Your Friends in the Tool Business

We’re happy to announce the recent addition of Simpson Strong-Tie products to the KMS fold. Simpson Strong-Tie is the premier manufacturer of construction fasteners from mechanical and chemical concrete to wood hangers and structural systems. One of the newest products is a cool new variation on the screwgun. It’s called the Quik-Drive® Auto-Feed Screw Driving System.

Continue reading “Stand Up & Drive – Simpson Quik-Drive Auto-Feed Screw System” →

General I-Carver Junior CNC Machine Demo

Published on by Your Friends in the Tool Business2 Comments

A while back we posted a clip from a local television station which featured our own Kevin Berthelette and a basic run down on the new General I-Carver Junior CNC Machine. Unfortunately, sawdust and sensitive electronic and video equipment don’t mix, so we were unable to show an actual demo of how this awesome and surprisingly affordable CNC works, on the show. Well the folks at General International have helped us out by producing the following video which shows the features and operation of the I-Carver Junior.

Continue reading “General I-Carver Junior CNC Machine Demo” →